Engine - GM (19433035)
19433035
OUR LATEST TWIST ON THE BIG-TORQUE 383 STROKER!
When it comes to cranking serious torque from the classic Small-Block, it's hard to beat the 383 stroker combination, which uses a long, 3.800-inch stroke with 4.000-inch bores to generate exceptional low-end pulling power and surprising high-rpm horsepower.
Chevrolet Performance's stroker crate engine is part of our range of Street Performance engines and is designed for optimal performance on the street and the occasional trip down the quarter-mile. It features lightweight aluminum cylinder heads based on the proven Fast Burn design, with large intake runners and 2.00/1.55-inch valves. Beehive-style valve springs enable great high-rpm performance and durability, allowing the SP383 to rev higher and build more horsepower. The result is 435 exhilarating horsepower and 445 lb.-ft. of seat-tugging torque.
Like all of our crate engines, it is built with a cast-iron block with four-bolt mains. It also features a forged steel crankshaft, an aggressive hydraulic roller camshaft and a high-flow, aluminum intake manifold. Use the Holley 770-cfm four-barrel carburetor, P/N 19170093 to achieve the listed horsepower and torque ratings.
TECH SPECS
Part Number: 19332532 / 19355722
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 383
Bore x Stroke (in): 4.005 x 3.800
Block (P/N 88962516): Cast-iron with 4-bolt main caps
Crankshaft (P/N 12489436): Forged steel
Connecting Rods (P/N 19332460): Heavy-duty PM steel
Pistons (P/N 12499103): Hypereutectic aluminum
Camshaft Type (P/N 19210723): Hydraulic roller
Valve Lift (in): .509 intake / .528 exhaust
Camshaft Duration (@.050 in): 222° intake / 230° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (in): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.6:1
Rocker Arms (P/N 19210724): Aluminum roller style
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Ignition Timing: 36° Total at 4,000 rpm
Maximum Recommended rpm: 6,000
Flexplate (P/N 14088765): 12.750"
Balanced: External
INSTALLATION NOTES
- Requires addition of carburetor, ignition, fuel pump, thermostat housing, thermostat, and starter (not included)
- 435 horsepower rating achieved during GM testing with high-rise single-plane intake manifold (P/N 12496822) and a 770-cfm carburetor with vacuum secondaries (P/N 19170093)
- Chevrolet Performance dual-plane intake manifold (P/N 12366573) may be used to avoid hood clearance problems, but peak power may decrease by approximately 15-20 horsepower
- Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
- Designed for pre-1976 street vehicles or any off-road vehicle
- Not intended for marine applications
- Min. 12 Months
- Safe, Secure Checkout
Product Details
Description
OUR LATEST TWIST ON THE BIG-TORQUE 383 STROKER!
When it comes to cranking serious torque from the classic Small-Block, it's hard to beat the 383 stroker combination, which uses a long, 3.800-inch stroke with 4.000-inch bores to generate exceptional low-end pulling power and surprising high-rpm horsepower.
Chevrolet Performance's stroker crate engine is part of our range of Street Performance engines and is designed for optimal performance on the street and the occasional trip down the quarter-mile. It features lightweight aluminum cylinder heads based on the proven Fast Burn design, with large intake runners and 2.00/1.55-inch valves. Beehive-style valve springs enable great high-rpm performance and durability, allowing the SP383 to rev higher and build more horsepower. The result is 435 exhilarating horsepower and 445 lb.-ft. of seat-tugging torque.
Like all of our crate engines, it is built with a cast-iron block with four-bolt mains. It also features a forged steel crankshaft, an aggressive hydraulic roller camshaft and a high-flow, aluminum intake manifold. Use the Holley 770-cfm four-barrel carburetor, P/N 19170093 to achieve the listed horsepower and torque ratings.
TECH SPECS
Part Number: 19332532 / 19355722
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 383
Bore x Stroke (in): 4.005 x 3.800
Block (P/N 88962516): Cast-iron with 4-bolt main caps
Crankshaft (P/N 12489436): Forged steel
Connecting Rods (P/N 19332460): Heavy-duty PM steel
Pistons (P/N 12499103): Hypereutectic aluminum
Camshaft Type (P/N 19210723): Hydraulic roller
Valve Lift (in): .509 intake / .528 exhaust
Camshaft Duration (@.050 in): 222° intake / 230° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (in): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.6:1
Rocker Arms (P/N 19210724): Aluminum roller style
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Ignition Timing: 36° Total at 4,000 rpm
Maximum Recommended rpm: 6,000
Flexplate (P/N 14088765): 12.750"
Balanced: External
INSTALLATION NOTES
- Requires addition of carburetor, ignition, fuel pump, thermostat housing, thermostat, and starter (not included)
- 435 horsepower rating achieved during GM testing with high-rise single-plane intake manifold (P/N 12496822) and a 770-cfm carburetor with vacuum secondaries (P/N 19170093)
- Chevrolet Performance dual-plane intake manifold (P/N 12366573) may be used to avoid hood clearance problems, but peak power may decrease by approximately 15-20 horsepower
- Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
- Designed for pre-1976 street vehicles or any off-road vehicle
- Not intended for marine applications
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
Shipping Policy
- In stock orders ship within 24 hours.
- Weekend orders will be processed the next business day.
- If a part is not in stock and must be ordered from the manufacturer, it usually takes 2-3 days to arrive to us and will be promptly shipped to you. Most of the orders are shipped complete within 2-3 business days. A few of the parts ordered from the manufacturer may take up to 5-6 business days to arrive and will shipped to you immediately.
- Depending upon location, ground shipments usually take 2-7 days.
- Your order may be shipped Overnight for an additional cost.
- Oversized shipments will be additional; you will be contacted prior to shipping for approval.
- We cannot guarantee transit times for ground and oversize orders.
- Shipping Carrier substitutions may be made at our determination in an attempt to reduce shipping cost to the customer.
- We do not ship internationally.
- In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.
- We do not ship COD orders.
Return Policy
- Contact us to arrange for any returns.
- A copy of the invoice will need to be included with the return.
- There is a 15% restocking fee charged against all returned parts.
- Parts must be resaleable and in the original packaging.
- We cannot take back used parts.
- We cannot take back installed or tried parts.
- Electrical parts are not returnable.
- We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria.
- Return request need to be within 30 days of receipt.
Cancellation Policy
- An order or a portion of an order may be cancelled up until the time it is shipped and no longer in our possession.
- If the cancelled part was special ordered from the manufacturer a return fee of 15% may apply.
GM
When you order your Engine ( 19433035) right here from Classic Elite Chevy Parts you will always receive a genuine OEM part. We specialize in OEM parts and accessories for All GM vehicles and pride ourselves on delivering exceptional service and offerings. Your Engine is guaranteed to fit select vehicles and even comes with a manufacturer's warranty.
You can shop for parts for all GM vehicles right here on our website. Get started by selecting what make you want to shop for below:
| Buick Models | Cadillac Models | Chevy Models | GMC Models |
| Hummer Models | Oldsmobile Models | Pontiac Models | Saturn Models |