Engine - GM (19540157)
- 19540157
Engine - GM (19540157)
- 19540157
- GM
- 19540157
- 19259233, 19301360, 19369338, 19370413, 19434642, 19435104
Details
- Brand:
- SKU:
19540157
- Description:
OUR MOST POWERFUL NATURALLY ASPIRATED 6.2L!
With Chevrolet Performance's aggressive ASA camshaft - developed for the high-rpm world of circle-track racing - installed in the LS3 6.2L engine, it comes alive with 525 uncompromising horsepower. That makes it the most powerful naturally aspirated 6.2L street engine in our portfolio - and one that has an edge to it. You'll notice it in the idle quality and you'll feel it when the revs quickly climb.
The ASA camshaft is a hydraulic roller with .525-inch lift on both sides, along with 226 degrees duration on the intake side and 236 degrees on the exhaust side. Coupled with a tight, 110-degree lobe separation angle, it helps the engine deliver excellent throttle response and breathe exceptionally well at high rpm. And for durability, we complement the cam with higher-rate valve springs.
You'll need tuning to make the most of the engine in a late-model GM vehicle. If you plan to use the engine in a vintage car, you'll need controller kit P/N 19354332, which includes the throttle pedal to match its electronically controlled throttle body.
TECH SPECS
Part Number: 19301360
Engine Type: LS-Series Gen IV Small-Block V-8
Displacement (cu in): 376 cu in (6.2L)
Bore x Stroke (in): 4.065 x 3.622 (103.25 x 92mm)
Block (P/N 12623967): Cast aluminum with 6-bolt, cross-bolted main caps
Crankshaft (P/N 12597569): Nodular iron
Connecting Rods (P/N 12607475): Powdered metal
Pistons (P/N 19207287): Hypereutectic aluminum
Camshaft Type (P/N 88958770): Hydraulic roller
Valve Lift (in): 0.525 intake / 0.525 exhaust
Camshaft Duration (@0.050 in): 226° intake / 236° exhaust
Cylinder Heads (P/N 12629063): Aluminum L92-style port; as cast with 68cc chambers
Valve Size (in): 2.165 intake / 1.590 exhaust
Compression ratio: 10.7:1
Rocker Arms (P/N 12669995 int): Investment cast, roll trunnion
Rocker Arms (P/N 12669993 exh): Investment cast, roll trunnion
Rocker Arm Ratio: 1.7:1
Recommended Fuel: Premium pump
Maximum Recommended RPM: 6,600
Reluctor Wheel: 58x
Balanced: Internal
INSTALLATION NOTES- Assembly does not include any electronics
- Use LS376/525 Engine Controller Kit for engine operation, P/N 19354332.
- Includes Chevy SS wet sump oil pan
- Intended for pre-1976 street vehicles or any off-road vehicle
- Not intended for marine applications
- Front-End Accessory Drive Kits are available in several configurations.
- Replaces:
19259233, 19301360, 19369338, 19370413, 19434642, 19435104
- MSRP: $15,342.36
- Discount: $2,799.98 (18.2% off)
- Sale Price: $12,542.38
- GM
- 19540157
- 19259233, 19301360, 19369338, 19370413, 19434642, 19435104
Details
- Brand:
- SKU:
19540157
- Description:
OUR MOST POWERFUL NATURALLY ASPIRATED 6.2L!
With Chevrolet Performance's aggressive ASA camshaft - developed for the high-rpm world of circle-track racing - installed in the LS3 6.2L engine, it comes alive with 525 uncompromising horsepower. That makes it the most powerful naturally aspirated 6.2L street engine in our portfolio - and one that has an edge to it. You'll notice it in the idle quality and you'll feel it when the revs quickly climb.
The ASA camshaft is a hydraulic roller with .525-inch lift on both sides, along with 226 degrees duration on the intake side and 236 degrees on the exhaust side. Coupled with a tight, 110-degree lobe separation angle, it helps the engine deliver excellent throttle response and breathe exceptionally well at high rpm. And for durability, we complement the cam with higher-rate valve springs.
You'll need tuning to make the most of the engine in a late-model GM vehicle. If you plan to use the engine in a vintage car, you'll need controller kit P/N 19354332, which includes the throttle pedal to match its electronically controlled throttle body.
TECH SPECS
Part Number: 19301360
Engine Type: LS-Series Gen IV Small-Block V-8
Displacement (cu in): 376 cu in (6.2L)
Bore x Stroke (in): 4.065 x 3.622 (103.25 x 92mm)
Block (P/N 12623967): Cast aluminum with 6-bolt, cross-bolted main caps
Crankshaft (P/N 12597569): Nodular iron
Connecting Rods (P/N 12607475): Powdered metal
Pistons (P/N 19207287): Hypereutectic aluminum
Camshaft Type (P/N 88958770): Hydraulic roller
Valve Lift (in): 0.525 intake / 0.525 exhaust
Camshaft Duration (@0.050 in): 226° intake / 236° exhaust
Cylinder Heads (P/N 12629063): Aluminum L92-style port; as cast with 68cc chambers
Valve Size (in): 2.165 intake / 1.590 exhaust
Compression ratio: 10.7:1
Rocker Arms (P/N 12669995 int): Investment cast, roll trunnion
Rocker Arms (P/N 12669993 exh): Investment cast, roll trunnion
Rocker Arm Ratio: 1.7:1
Recommended Fuel: Premium pump
Maximum Recommended RPM: 6,600
Reluctor Wheel: 58x
Balanced: Internal
INSTALLATION NOTES- Assembly does not include any electronics
- Use LS376/525 Engine Controller Kit for engine operation, P/N 19354332.
- Includes Chevy SS wet sump oil pan
- Intended for pre-1976 street vehicles or any off-road vehicle
- Not intended for marine applications
- Front-End Accessory Drive Kits are available in several configurations.
- Replaces:
19259233, 19301360, 19369338, 19370413, 19434642, 19435104
Also Purchased
Vehicle Fitment
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|
Classic Elite Chevy Parts
When you order your Engine ( 19540157) right here from Classic Elite Chevy Parts you will always receive a genuine OEM part. We specialize in OEM parts and accessories for All GM vehicles and pride ourselves on delivering exceptional service and offerings. Your Engine is guaranteed to fit select vehicles and even comes with a manufacturer's warranty.
You can shop for parts for all GM vehicles right here on our website. Get started by selecting what make you want to shop for below:
| Buick Models | Cadillac Models | Chevy Models | GMC Models |
| Hummer Models | Oldsmobile Models | Pontiac Models | Saturn Models |
